Perform this procedure to display the Auto-sense configuration on the switch.
show auto-sense [access-differv] [data] [dhcp-detection] [eapol] [fa] [isis] [onboarding] [qos] [sd-wan] [voice] [wait-interval]
show interfaces gigabitEthernet auto-sense [THIS IS CHANGED FOR 9.1 {slot/port[/sub-port][-slot/port[/sub-port]][,...][slot/all][all]}]
Display the Auto-sense status for Fabric Attach (FA):
Switch:1>show auto-sense fa ================================================================================== AUTO-SENSE FA Config ================================================================================== MSG-AUTH MSG-AUTH-KEY ---------------------------------------------------------------------------------- enabled **** ---------------------------------------------------------------------------------- ================================================================================== AUTO-SENSE FA Client specific config ================================================================================== TYPE EAPOL STATUS I-SID VLANID C-VID MGMT I-SID MGMT C-VID ---------------------------------------------------------------------------------- camera Auto 100 100 untag - - wap-type1 Auto 200 200 untag - - open-virtual-switch Auto - - - - - proxy-no-auth Auth 300 300 untag - - proxy Auth 400 n/a 400 400 400 ---------------------------------------------------------------------------------- 6 out of 6 Total Num of AUTO-SENSE entries displayed ----------------------------------------------------------------------------------
Display the Auto-sense configuration related to ExtremeCloud SD-WAN:
Switch:1>show auto-sense sd-wan ========================================================================================== AUTO-SENSE GLOBAL Config ========================================================================================== SDWAN SDWAN MULTI-AREA VRF ------------------------------------------------------------------------------------------ HOME ------------------------------------------------------------------------------------------ ========================================================================================== AUTO-SENSE SD-WAN Logical Interfaces Multi-Area Config ========================================================================================== DEST-IP MULTI-AREA ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------ 10.10.10.10 REMOTE 20.20.20.20 HOME 30.30.30.30 REMOTE ------------------------------------------------------------------------------------------ 4 out of 4 Total Num of AUTO-SENSE entries displayed ------------------------------------------------------------------------------------------
Display the Auto-sense configuration related to voice:
Switch:1>show auto-sense voice =============================================================================== AUTO-SENSE VOICE Config =============================================================================== TYPE LDDP-AUTH ENABLE I-SID C-VID DSCP PRIORITY ------------------------------------------------------------------------------- phone FALSE 2000 2000 46 6 ------------------------------------------------------------------------------- 1 out of 1 Total Num of AUTO-SENSE entries displayed -------------------------------------------------------------------------------
Display the global Auto-sense wait-interval information:
Switch:1>show auto-sense wait-interval ============================================================================ AUTO-SENSE GLOBAL Config ============================================================================ WAIT INTERVAL ---------------------------------------------------------------------------- 50 ---------------------------------------------------------------------------- ---------------------------------------------------------------------------- 0 out of 0 Total Num of AUTO-SENSE entries displayed ----------------------------------------------------------------------------
Display the Auto-sense status and state on a range of ports:
Switch:1>enable Switch:1#show interfaces gigabitethernet auto-sense 1/1-1/5 ====================================================================== Port Auto-sense ====================================================================== ---------------------------------------------------------------------- PORT AUTO-SENSE AUTO-SENSE AUTO-SENSE AUTO-SENSE NUM STATUS STATE PORT-DATA-ISID PORT-WAIT-INTERVAL ---------------------------------------------------------------------- 1/1 Enable FA-PROXY-RING -- 20 1/2 Enable SD-WAN -- 10 1/3 Enable DOWN -- 10 1/4 Enable DOWN -- 10 1/5 Disable OFF -- 10